Do you want to explore the Nether and all its wonders? Then it’s time to build a Nether portal with lava! It’s a simple process, but it requires some careful planning and a few tools. In this article, we’ll cover step by step how to build a Nether portal using lava, so you can easily travel from the Overworld to the Nether and back again whenever you want.

Before we start, it’s important to note that building a Nether portal with lava can be dangerous and somewhat difficult. However, with care and attention, it’s possible to create a stable and secure portal. So, let’s dive in and get started on creating your very own Nether portal!

Materials Required for Crafting a Nether Portal with Lava

Crafting a Nether portal with lava is one of the most important skills to be aware of in the world of Minecraft. It requires a handful of specific tools and materials. Here is the list of materials you need to have to craft a Nether portal with lava:

  1. Obsidian: You will need 10 blocks of Obsidian to craft a Nether portal with lava.
  2. Diamond Pickaxe: Since you will be mining for Obsidian, you will also need a diamond pickaxe to mine it.
  3. Bucket: You will require a bucket to get lava.
  4. Flint and Steel: You will require a flint and steel to light the portal.

Step-By-Step Guide for Crafting a Nether Portal with Lava

Now that you have all the required materials, let’s dive into crafting a Nether portal with lava step-by-step:

Step 1: Finding the Right Location

The first step to crafting a Nether portal with lava is to find the right location. The location you choose should be safe, away from your base, and convenient for travel. Once you have found the perfect spot, clear out the area around the spot so that you have enough space to build the portal.

Step 2: Mining Obsidian

Once you have found the right location, it’s time to start mining for Obsidian. You will need Diamond Pickaxe and ten blocks of Obsidian to craft a Nether portal.

Mining Obsidian can be a lengthy process, but it’s necessary for crafting a Nether portal with lava. You can find Obsidian in deep caves, but it’s more likely to be seen near pools of lava. Use a Diamond Pickaxe to mine the Obsidian.

Step 3: Building the Frame

Once you have the Obsidian blocks mined out, it’s time to start building the frame of your Nether portal. Start by placing four blocks of Obsidian in a square on the ground. Then, stack the Obsidian blocks in the middle square, creating an open space in the middle.

After that, place the remaining Obsidian blocks on the top edge of the frame, completing the Nether portal’s frame. Make sure the portal is big enough to walk through.

Step 4: Acquiring the Lava

The next step is to acquire the lava that you will use to activate the Nether portal. You can find lava pools near to the Nether portal or by mining deep down underground with a bucket and collect the lava in a bucket.

Step 5: Placing the Lava

Once you have the lava in your bucket, it’s time to place it in the middle of the Nether portal frame you have built. Pour the lava into the center of the portal and wait for it to settle down.

Step 6: Activate with Flint and Steel

Now that your Nether portal frame is built and you have poured lava into the center, use a flint and steel to start the fire on the lava block inside the frame.

The flames should start spreading from the lava block and cover the whole frame, indicating that the portal is activated and ready to use.

Step 7: Enter the Nether Portal

Walk into the now activated Nether portal. When you walk through the portal, you will be transported to a different dimension, named Nether.

Step 8: Exploration of Nether

Nether is a fiery dimension, where you can find new items, new biomes, and new challenges. Be careful as this world is a perilous place, where hostile mobs roam freely.

Step 9: Return to Overworld

When you are done exploring the Nether, you can return to the Overworld by walking back through the portal. You will immediately be transported back, and you can start your life in the Overworld again.

Step 10: Conclusion

Crafting a Nether portal with lava is one of the essential skills to be aware of in the world of Minecraft. It allows you to travel between biomes, explore new dimensions, and fight new mobs. Once you learn how to build it, the Nether portal with lava can provide an enormous advantage in Minecraft.

Why use a lava bucket for a Nether portal?

If you’re a Minecraft player, you know that a Nether portal is essential for accessing the Nether. But did you know that using a lava bucket to create a Nether portal is more efficient and cost-effective? In this section, we’ll discuss the benefits of using a lava bucket for a Nether portal.

1. Using a Lava Bucket Is More Efficient

Using a lava bucket to create a Nether portal is more efficient than using obsidian blocks. Why? Because it requires fewer resources. With just one lava bucket, you can make a portal, whereas with obsidian, you need at least 10 blocks. Plus, using a lava bucket is much faster than mining obsidian blocks.

2. It’s Cost-Effective

Not only is using a lava bucket more efficient, but it’s also more cost-effective. Lava buckets can be found in the Nether, which means you don’t need to use any of your resources to acquire them. In contrast, obsidian blocks require a diamond pickaxe to mine, which can be expensive and time-consuming to acquire.

3. It’s Easier to Transport

Transporting obsidian can be a pain. Obsidian is heavy and requires a lot of inventory space to carry. With a lava bucket, all you need is one inventory slot to transport it.

4. Lava Buckets Make for a More Interesting Build

Let’s face it, obsidian is boring. Using lava buckets to create your Nether portal can add an interesting and unique touch to your build. Plus, it can help your portal stand out from the rest.

5. It’s More Environmentally Friendly

By using a lava bucket to create your Nether portal, you’re using a resource that is abundantly available in the Nether. In contrast, obsidian blocks must be mined from the Overworld, which can have a negative impact on the environment.

6. It Saves Time

Using a lava bucket to create a Nether portal is much faster than mining obsidian blocks. This means you can spend less time building and more time exploring the Nether.

7. It’s Fun

Let’s be honest, using a lava bucket to create a Nether portal is just plain fun. It adds an element of excitement to the game and can make the experience more enjoyable.

8. It Can Be Used in Multiplayer

Using a lava bucket to create a Nether portal can be especially useful in multiplayer. With multiple players working together, it’s easier to gather enough resources to make multiple portals without the need for a ton of obsidian blocks.

9. It Can Save on Inventory Space

As previously mentioned, transporting obsidian can take up a lot of inventory space. By using a lava bucket, you can save on space, allowing you to carry more resources and items.

10. It’s a Great Alternative

If you’re short on resources or just want to try something new, using a lava bucket to create a Nether portal is a great alternative to the traditional obsidian method. It’s unique, efficient, and can add an interesting touch to your Minecraft world.

Materials Needed

Before you can even think about building a nether portal with lava, it’s essential to gather all the necessary materials. Here are the items you’ll need:

Obsidian blocks (minimum of 10)
Diamond pickaxe
Lava source

Step-by-Step Instructions

Step 1: Find a Location

The first step is to locate an area where you want to build your nether portal. Ensure you directly place it on a non-flammable surface as the fire will quickly spread. Avoid building it near trees, wooden structures, or other flammable materials.

Step 2: Build an Obsidian Frame

Next, create a frame for your nether portal using obsidian blocks. A nether portal requires 10 obsidian blocks, so start by placing four blocks in a square. Connect the blocks at each corner by placing obsidian blocks between them. Repeat this process on the opposite side. Once you formed the frame, you’ll still have gaps in between, don’t fill those gaps just yet.

Step 3: Add Lava to the Frame

Take the lava bucket you prepared and place the lava inside the obsidian frame you created in step 2. Place it in one of the top two blocks in the obsidian frame and wait for the lava to flow down and fill the bottom block. The lava will turn into obsidian once it hits the bottom block.

Step 4: Fill the Remaining Gaps with Obsidian Blocks

Use your diamond pickaxe to mine obsidian and fill the remaining gaps in your obsidian frame, making sure to fill any gaps that might have appeared as the lava flowed through the frame. Be patient when collecting obsidian blocks; it’s it’s tough to get it, but it’s an essential ingredient in creating a nether portal with lava.

Step 5: Activate the Portal

Now that you have an obsidian frame, use your flint and steel to ignite the innermost block. You will see the portal become active with purple, swirling in and around it. When you walk through it, you’ll be transported to the nether dimension!


Creating a nether portal with lava is an essential step in exploring the nether dimension in Minecraft. Once you’ve got a portal up and running, you’ll be able to move to and fro between dimensions with ease. Building a nether portal in Minecraft is a self-rewarding achievement that freshens up the gameplay experience and unlocks new, challenging in-game content.

That’s how you make a nether portal with lava!

Now that you know how to create a portal to the nether with lava, you can get started on exploring the dark abyss. Just remember to take the necessary precautions and bring the right gear. Always bring a sword and armor, and don’t forget to pack food and supplies. Thanks for reading and we hope you learned something new today. Let’s catch up again soon for more exciting adventures in the world of Minecraft. See you later!