Have you ever wanted to make your own unique and eye-catching pens? If so, epoxy pens might be just what you’re looking for! Epoxy resin is a popular crafting material that can create a glossy, durable finish on a variety of surfaces. Using this material to make pens is a fun and creative way to customize your own writing tools.

To make epoxy pens, you will need a few basic supplies, including pen blanks, epoxy resin, a mold, and some mixing and pouring tools. The process involves pouring the resin into the mold around the pen blank, allowing it to cure, and then smoothing and finishing the pen. Although it may seem intimidating, with a little patience and practice, anyone can create beautiful and functional epoxy pens. So, grab your supplies and get ready to embark on a fun and rewarding crafting project!

Gathering Materials

The first step to creating your own epoxy pen is to gather all of the necessary materials. You don’t want to start the project and then realize that you’re missing a vital component. Here are the materials you’ll need:

Pen Kit

The pen kit is the most important part of the project as it includes all of the necessary hardware that holds the pen together. You can purchase these kits online or from a local crafts store.

Epoxy Resin

Epoxy resin is a two-part adhesive that will hold all the pieces of the pen in place. You’ll typically need about two ounces of epoxy resin for each pen.


You can add pigment to your epoxy resin to give your pen a unique, one-of-a-kind look. You can choose from a range of colors, and you’ll only need a few drops of pigment to achieve the desired effect.

Abrasive Paper

You’ll need abrasive paper to smooth out any rough edges on your pen before applying the epoxy resin.

Sanding Tools

You’ll need to sand your pen before applying the epoxy resin. You’ll need a sanding block and a variety of sandpaper ranging from coarse to fine.

Protective Equipment

It’s important to use protective equipment when working with epoxy resin. You should wear gloves, eye protection, and a respirator mask to avoid any harmful vapors.

Measuring Tools

You’ll need measuring tools like a scale and measuring cups to ensure that you have the right amount of epoxy resin and pigment.

Stirring Tools

You’ll need stirring tools like wooden stir sticks or toothpicks to mix the epoxy resin and pigment.

Paper Towels

Epoxy resin can be messy, so it’s good to have some paper towels on hand to clean up any spills or drips.

Work Space

You’ll need a clean, flat work surface to work on your pen. It’s best to work on a surface that can be easily cleaned and won’t be damaged by the epoxy resin.

Gathering the materials is the first step in making an epoxy pen. It’s essential to have everything you need before starting your project to ensure that everything goes smoothly. Next, we’ll move on to preparing the pen for the epoxy resin.

Choosing Your Epoxy Resin

When it comes to making epoxy pens, choosing the right resin is fundamental. It is important to consider the type or purpose of the pen you want to create so that you can select an epoxy resin that suits your needs. Therefore, before you decide on the resin, take time to research and understand the different types in the market to make an informed choice. Here are some factors to consider:


Clarity refers to how transparent the epoxy resin will dry post-application. Some pen designs require crystal clear clarity, while others are okay with slight tints. Therefore, consider the amount of transparency needed and select a resin that will meet your project requirements.

Curing Time

Epoxy resins have different curing times, and it is essential to select one that matches your crafting skills. If you are a beginner, it is advisable to use a slow curing epoxy resin to give you ample working time and minimize mistakes.


Viscosity is the flowability of the epoxy resin; it can either be thick or thin. Thick epoxy resins give a 3-dimensional effect with a raised surface, while thin epoxy resins provide a smooth seamless finish. Choose a viscosity that suits the pen design you’re creating.

UV Resistant

UV resistant epoxy resins are crucial for outdoor pens as they protect the pen from fading, chalking, and yellowing when exposed to sunlight. Therefore, if creating an outdoor pen, go for this type of resin.

Thermal Resistance

Consider the environment where the pen will be used; if it’s a hot climate, select an epoxy resin that is highly heat resistant to prevent it from melting.

Material Compatibility

Different types of pens (wood, acrylic, aluminum, plastic) require different types of epoxy resins. Therefore, it is important to research the compatibility of your preferred resin with the pen material.

Food Safe

If creating a pen that will be in contact with food, choose a food-safe epoxy resin that is certified and will not contaminate the food.


Epoxy resins are available in different colors, and you can tint them to match your desired pen color. It’s important to note what type of tint is recommended for your preferred resin.


Epoxy resins have a tendency to create air bubbles during application, which can ruin the final look of the pen. Some resins have fewer bubbles than others, and others might require special techniques to prevent the bubbles from forming.


Not all epoxy resin brands are created equal. Some are more reliable than others and have a good reputation in the market. Do your research and pick a brand that has good customer reviews and high-quality products.

Preparing the Pen Blanks

When it comes to making epoxy pens, preparing the pen blanks is an essential step. Pen blanks can be made from a variety of materials, including wood, acrylic, or resin. Here are some tips for preparing pen blanks:

Choosing a Material

The first step in preparing pen blanks is choosing the material you want to work with. Wood is a popular choice because it is affordable and easy to work with. Acrylic is also a great option because it is durable and comes in a variety of colors. Resin is another material that can be used, but it requires more skill and experience to work with.

Cutting the Blanks

Once you have chosen the material for your pen blanks, you need to cut them to the right size. The standard size for pen blanks is 3/4 inch by 3/4 inch by 5 inches. If you are using a bandsaw or a table saw, make sure to wear protective gear and take your time when cutting the blanks to avoid accidents.

Drilling the Hole for the Pen Kit

After cutting the blanks, you need to drill a hole in the center of each one for the pen kit. Use a drill press to ensure that the hole is straight and centered. Make sure to use a bit that is the right size for your pen kit.

Preparing for Epoxy Resin Pouring

Before pouring the epoxy resin, you need to prepare the pen blanks by sanding them. Start with a low-grit sandpaper and work your way up to a high-grit sandpaper to ensure a smooth finish. Make sure to wipe the blanks clean with a cloth to remove any dust or debris.

Creating a Seal

To prevent the epoxy resin from leaking out of the ends of the pen blanks, you need to create a seal. You can use masking tape or modeling clay to seal the ends of the blanks. Make sure to firmly seal the ends to prevent any leaks.

Materials NeededTools Needed
Epoxy ResinDrill Press
Pen BlanksBandsaw or Table Saw
Pen KitSandpaper
Masking Tape or Modeling ClayCloth

By following these steps, you can prepare your pen blanks for pouring epoxy resin and create a beautiful, handmade pen.

Happy Pen-Making!

And there you have it! Making epoxy pens is a fun and exciting activity that anyone can do. With the right materials and a little bit of creativity, you can turn an ordinary pen into a work of art. We’ve given you all the tips and tricks you need to get started on your own pen-making journey. Thank you for reading our article, and we hope you visit us again soon for more DIY projects and creative inspiration!